Because of the complete pocketless structure by adopting the integral-molding with PEEK resin for the parts in contact with liquid, it is most suitable for ultra pure water or chemicals.
Features
Excellent corrosion resistant feature
Because excellent corrosion resistant PEEK resin is used for the parts in contact with liquid, it is most suitable for the measurements of corrosive fluid and clean fluid etc. In addition, because bulking agent is not used for PEEK resin, the metallic ion does not dissolve and all nonconductive fluids including ultra pure water can be measured.
Vibration noise resistant structure
Because high frequency ultrasonic sensor is used, PEEK series is not influenced by mechanical noise such as piping vibrations.
Complete pocketless structure
Because the pocketless structure where fluid is always moving is adopted, it is suitable for the measurement of the liquid that changes quality easily.
Weight saving
It can be directly installed at the resin piping of the ultra pure water line etc. by weight saving with resin made.
Main specification
| Applicable fluid | Liquid (corrosive fluid and ultra pure water are also acceptable) | ||
| Accuracy | +3% RD (+1% RD: Option) | ||
| Fluid Temperature | 0 – 140 ℃ | ||
| Max. Working press. | 0.39 – 0.98 MPa | ||
| Connection Size | 15 mm (1/2B)– 20 mm (1B) | ||
| Material | Housing | PEEK (Polyether ether ketone) resin | |
| Connector | PP, PVDF resin
|
||
| O-ring | Fluoric rubber | ||
| Flow Rate range | 1.7 – 220 L/ min
(Different depending on the connection size and viscosity) |
||
| Piping Installation | Horizontal, vertical, Diagonal | ||